- Ji Chen, Xin Ye, Shenglun Gao, Yuxin Chen, Yunwei Zhao, Chunyu Huang, Kai Qiu, Shining Zhu, Tao Li. A planar wide-angle-imaging camera enabled by metalens array. Optica, 2022; DOI: 10.1364/OPTICA.446063
Tao Li and colleagues from Nanjing University in China report their new ultrathin camera in Optica, Optica Publishing Group’s journal for high-impact research. The new camera, which is just 0.3 centimeters thick, can produce clear images of a scene with a viewing angle of more than 120 degrees.
Wide-angle imaging is useful for capturing large amounts of information that can create stunning, high-quality images. For machine vision applications such as autonomous driving and drone-based surveillance, wide-angle imaging can enhance performance and safety, for example by revealing an obstacle you couldn’t otherwise see while backing up in a vehicle.
“To create an extremely compact wide-angle camera, we used an array of metalenses that each capture certain parts of the wide-angle scene,” said Li. “The images are then stitched together to create a wide-angle image without any degradation in image quality.”
Miniaturizing the wide-angle lens
Wide-angle imaging is usually accomplished with a fish-eye compound lens or other type of multilayer lens. Although researchers have previously tried to use metalenses to create wide-angle cameras, they tend to suffer from poor image quality or other drawbacks.
In the new work, the researchers used an array of metalenses that are each carefully designed to focus a different range of illumination angles. This allows each lens to clearly image part of a wide-angle object or scene. The clearest parts of each image can then be computationally stitched together to create the final image.
“Thanks to the flexible design of the metasurfaces, the focusing and imaging performance of each lens can be optimized independently,” said Li. “This gives rise to a high quality final wide-angle image after a stitching process. What’s more, the array can be manufactured using just one layer of material, which helps keep cost down.”
Seeing more with flat lenses
To demonstrate the new approach, the researchers used nanofabrication to create a metalens array and mounted it directly to a CMOS sensor, creating a planar camera that measured about 1 cm × 1 cm × 0.3 cm. They then used this camera to image a wide-angle scene created by using two projectors to illuminate a curved screen surrounding the camera at a distance of 15 cm.
They compared their new planar camera with one based on a single traditional metalens while imaging the words “Nanjing University” projected across the curved screen. The planar camera produced an image that showed every letter clearly and had a viewing angle larger than 120°, more than three times larger than that of the camera based on a traditional metalens.
The researchers note that the planar camera demonstrated in this research used individual metalenses just 0.3 millimeters in diameter. They plan to enlarge these to about 1 to 5 millimeters to increase the camera’s imaging quality. After optimization, the array could be mass produced to reduce the cost of each device.
We would love to say thanks to the author of this short article for this incredible material
Researchers create miniature wide-angle camera with flat metalenses